Challenging and innovative
English
Roll Die Punching Machine based on international advanced technology, it's widely used in paper cup fan products. It adopts a micro-computer, human-computer control interface, servo positioning, alternating current frequency converter, photoelectric correcting deviation system, centralized oil lubrication.
The equipment is suitable for the paper thickness of 150-350 gsm roll paper for rapid and precise punching, collecting, and stripping at the same time, can be applied to paper cups, paper bowls, paper plates etc.
Roll Die Punching Machine based on international advanced technology, it's widely used in paper cup fan products. It adopts a micro-computer, human-computer control interface, servo positioning, alternating current frequency converter, photoelectric correcting deviation system, centralized oil lubrication.
The equipment is suitable for the paper thickness of 150-350 gsm roll paper for rapid and precise punching, collecting, and stripping at the same time, can be applied to paper cups, paper bowls, paper plates etc.
Model | FDC850 | FDC920 | FDC1000 | FDC1200 |
Max Paper Width | 850mm | 920 | 1000 | 1200 |
Cutting Precision | ±0.20mm | |||
Paper Gram Weight | 150-400g/m² | |||
Production Capacity | 280・380ti mes/min | 280・380ti mes/min | 280-330times/min | 260-300times/min |
Air Pressure Requirement | 0.6Mpa | |||
Air Pressure Consumption | 0.25m3/min | |||
Weight | 3.5T | 4T | 4.5T | 5T |
Max Roller Diameter | 1500mm | |||
Total Power | 10KW | 10KW | 10KW | 12KW |
It adopts a micro-computer, human-computer control interface, direct connection servo positioning which make higher accuracy, and we make the wallboard, base much stronger than others. It guarantees that when the machine runs up to 380 strokes/min without any shaking.
Adopting forced lubrication system to ensure main driving oil supply regularly and reduce friction and prolong the machine life, you could set it to lubricate 10 seconds every 6 minutes.
The die-cutting force is provided by a 5.5KW inverter motor. It is not only power-saving, but also can realize the step-less speed adjustment, especially when coordinate with the extra-large flywheel, which makes the die-cutting force strong and steady, and the electricity can be further reduced.
We adopt two swing arm cams which are much easier to adjust and operate when you change the punching mould, and it has higher stable pressure and high performance.
The coordination between the stepping motor and the photoelectric eye which can identify colours assures the perfect fit of the die-cutting position and figures.
Frequency converter controls the main motor, with features of low energy and high efficiency. PLC and HMI: screen display the running data and status, all of the parameter can be set through the screen. Electrical Control System: adopts microcomputer control, encoder angle detect and control, photoelectric chase and detect, achieving from paper feeding, convey, die punching and delivering process automatic control and detect. Automatic Tension Control can control the paper tension automatically.
Adopts chain type pneumatic roller unwind, tension controls unwind speed, and that's hydraulic, it could support at 1.5T paper. Max roll paper diameter is 1.5m.
We adopt swiss material that could be used for at least 400 million strokes, and if the mould can't cut well, you could sharpen the blade by a flat grinding machine, it could be sharpened 4-5times.
Each punching mould in one cavity is divided into 4 pieces which can be adjusted easily.
